NOMAD Contact UsWe Respond Within 6 Hours Ask The ExpertsNOMAD AIR OPERATED DIAPHRAGM PUMPS & SPARES Air Inlet: 19 mm (3/4″) Inlet: 76 mm (3″) Outlet: 76 mm (3″) Suction Lift: 5.5 m Dry (18′) or 9.45 m Wet (31′) Max. Flow Rate: 878 lpm (232 gpm) Max. Size Solids: 10 mm (3/8″) Height: 810…
NOMAD Contact UsWe Respond Within 6 Hours Ask The ExpertsNOMAD AIR OPERATED DIAPHRAGM PUMPS & SPARES Air Inlet: 19 mm (3/4″) Inlet: 51 mm (2″) Outlet: 51 mm (2″) Suction Lift: 6.4 m Dry (21′) or 9.5 m Wet (31′) Max. Flow Rate: 617 lpm (163 gpm) Max. Size Solids: 6.4 mm (1/4″) Height: 668…
NOMAD Contact UsWe Respond Within 6 Hours Ask The ExpertsNOMAD AIR OPERATED DIAPHRAGM PUMPS & SPARES Air Inlet: 13 mm (1/2”) Inlet: 38 mm (1-1/2”) Outlet: 32 mm (1-1/4”) Suction Lift: 5.49 m Dry (18”) or 8.53 m Wet (28’) Max. Flow Rate: 288 lpm (76 gpm) Max. Size Solids: 4.8 mm (3/16”) Height: 442…
NOMAD Contact UsWe Respond Within 6 Hours Ask The ExpertsNOMAD AIR OPERATED DIAPHRAGM PUMPS & SPARES Air Inlet: 6 mm (1/4”) Inlet: 25 mm (1”) Outlet: 19 mm (3/4”) Suction Lift: 5.18 m Dry (17’) or 9.45 m Wet (31’) Max. Flow Rate: 132 Ipm (35 gpm) Max. Size Solids: 3.2 mm (1/8”) Height: 279…
NOMAD Contact UsWe Respond Within 6 Hours Ask The ExpertsNOMAD AIR OPERATED DIAPHRAGM PUMPS & SPARES Air Inlet: 6 mm (1/4”) Inlet: 13 mm (1/2”) Outlet: 13 mm (1/2”) Suction Lift: 1.22 m Dry (4’) or 9.14 m Wet (30’) Max. Flow Rate: 54.9 Ipm (14.5 gpm) Max. Size Solids: 1.6 mm (1/16”) Height: 224…
Among its many advantages, the most outstanding feature about AOD pump is its ability to operate without motor, self-priming and able to run dry without damage. These characteristic are extremely important in industries such as mining, food processing, paint, chemical and many more. Tabla AOD pumps are tough, high quality, low cost and well-suited for many applications. All…
Almatec Futur Omega Air-Operated Diaphragm Pump ALMATEC manufactures a range of air-operated double diaphragm pumps with a wide range of products, like the Futur Series. FUTUR SLS model pumps feature stainless-steel (316L, with extremely low carbon content) construction, making them ideal for handling solvents, mixtures of solvents and strippers. The housing parts are machined from a solid…
Almatec Futur SLS Air-Operated Diaphragm Pump FUTUR SLS model pumps feature stainless-steel (316L, with extremely low carbon content) construction, making them ideal for handling solvents, mixtures of solvents and strippers. The housing parts are machined from a solid block of rolled steel and polished afterwards, the only way in which a pore-free surface can be…
Almatec Futur E Air-Operated Diaphragm Pump FUTUR H model pumps have been designed to operate ideally in hot applications involving acids and caustics. The temperature limit is 200°C (390°F) at max. 2 bar (29 psig). APPLICATIONS Hot applications with acids Hot applications with caustics MATERIALS Center housing: PTFE-TFM Side housings: PTFE conductive PUMP SIZES &…
Almatec Futur E Air-Operated Diaphragm Pump The FUTUR E model has been designed to be abrasion-resistant, which is a requirement for pumping slurries. To meet these operational demands, they are constructed of PE (polyethylene). It has a very high abrasion resistance (higher than steel), good impact value and withstands the introduction of slurry particles. Its…