Wilden P200 – 25 mm (1″) Advanced Plastic Pump

The Wilden® P200 – 1″ / 25 mm Advanced™ Series bolted plastic AOD pumps are available in Polypropylene, PVDF or PFA.

They come equipped with the Pro-Flo® Air Distribution System (ADS), which provides the longest-lasting wear parts, on/off reliability, maximum Mean Time Between Repair (MTBR) and lube-free operation.

Elastomers are available in the following materials:

Buna-N
EPDM
Neoprene
Polyurethane
PTFE
Saniflex™
Viton®
Wil-Flex™

A variety of options, such as ANSI and DIN flanges and NPT/BSPT threads, are available to meet your specific application requirements.

Contact Us

We Respond Within 6 Hours

Wilden P200 – 25 mm (1″) Advanced Plastic Pump

Features & Benefits

Higher flow rates/Increased pump output
Intrinsically safe
Bolted connections for superior containment
Variable flow and pressure
Shear-sensitive
Dry-run capable
Portable and submersible
Viscous and non-viscous product transfer
Large solids passage
High suction lift
Ease of operation and maintenance

DEPENDABLE

Longest Mean Time Between Repair (MTBR)
Increased On/Off reliability
Reduced turbulence
Superior torque retention
Anti-freezing ADS
Reduced internal friction
Largest chemical compatibilities

ECONOMICAL

Greater flow per SCFM input
Reduced air consumption and kilowatt usage
Lower operational costs and downtime
Optimized applications

Performance

WETTED HOUSINGS (WATER CHAMBERS AND MANIFOLDS)

Material	Ship Wt
Polypropylene	10 kg (22 lbs)
PVDF	15 kg (32 lbs)
PFA	18 kg (40 lbs)

NON-WETTED HOUSINGS

Material	Ship Wt
Polypropylene	10 kg (22 lbs)
PVDF	15 kg (32 lbs)
PFA	18 kg (40 lbs)

Description	Material
Center Block	Polypropylene
Air Chambers	Polypropylene
Air Valve	Polypropylene

FLOW RATE TO 220 LPM (58 GPM)
MAX PRESSURE = 8.6 BAR (125 PSI)

MAXIMUM SUCTION LIFT CAPABILITY

3.6m (11.9″) Dry, 9.8 m Wet (32.0″)

MAXIMUM DIAMETER SOLIDS

4.76mm (3/16″)

DISPLACEMENT PER STROKE

Rubber- 0.32 l (.09 gal)
TPE- 0.33 l (.09 gal)
PTFE Reduced Stroke- 0.22 l (.06 gal)
PTFE Full Stroke- 0.3 l (.08 gal)

Elastometer Options

Elastomer Options

Material	Temperature Limits
Buna-N	-12.2 to +82.2 °C (+10 to +180 °F)
EPDM	-51.1 to +137.8 °C (-60 to +280 °F)
Neoprene	-17.8 to +93.3 °C (+0 to +200 °F)
Polyurethane	-12.2 to +65.6 °C (+10 to +150 °F)
PTFE	+4.4 to +104.4 °C (+40 to +220 °F)
Saniflex™	-28.9 to +104.4 °C (+20 to +220 °F)
Viton®	-40 to +176.7 °C (-40 to +350 °F)
Wil-Flex™	-40 to +107.2 °C (-40 to +225 °F)

Manuals

Manuals

Wilden P200 – 25 mm (1″) Advanced Plastic Pump Manual

Following are a wide range of installation, engineering, and maintenance manuals for Wilden diaphragm pumps. These can assist you in ordering any spares parts you may require, and assist with any installation and troubleshooting you may encounter.