access-covers-banner

All Pumps stock a full range of cast iron access covers, grates and frames to meet all requirements and Australian standards for both Stormwater and Sewer access applications. Main manufacturer of access covers & grates is Hercules.

Hercules Access Covers & Grates

A full range of Gas tight covers and frames are also available in Class B for light duty situations and D ratings for heavy duty loadings.

Load Classifications

Load Classifications

Access covers and grates shall be designated by classes A,B,C,D,E,F and G according to load capacity as set out in the table below. The design loads as specified below, shall be used for testing. The appropriate class for a cover or grate depends upon the place of installation. Some place of installation, relative to class, are outlined below. The selection of the appropriate class is the responsibility of the designer and where there is doubt the stronger.

Download

access-covers-brochure
Specification Options
RatingClass AClass BClass CClass DClass EClass FClass G
Typical UseAreas (including
footways)
accessible only
to pedestrians &
pedal cyclists &
closed to other
traffic (extra
light duty
Areas (including
footways & light
tractor paths)
accessible to
vehicles
(excluding
commercial
vehicles) or
livestock
(light duty)
Malls and areas
open to slow
moving
commercial
vehicles
(medium duty)
Carriage ways
of roads &
areas open to
commercial
vehicles
(heavy duty)
General docks &
aircraft
pavements
(extra heavy
duty – E)
Docks & aircraft
pavements
subject to high
wheel loads
(extra heavy
duty – F)
Docks & aircraft
pavements subject
to very
high wheel
loads(extra
heavy duty – G)
Nominal Wheel Loading Kg3502,6705,0008,00013,00020,00030,000
Serviceablility6.753100140267400600
Ultimate Limit State
Design Load kN
1080150210400600900
NOTES
  1. Nominal wheel loads are given for guidance only. Consideration should be given to the type, size and pneumatic pressure of the load applied.
  2. Class B design loads exceed AS 5100.2 requirements for footway loading.
  3. Class D design loads exceed AS 5100.2 requirements for a W80 wheel load.
  4. Class C units are based on intermediate load.
  5. The serviceability load is set at 2/3 of the ultimate limit state design load.
  6. A force of 1 kN is approximately equal to the weight of 100kg.

Range

Access Cover Options for KPPS100L Pump Station

Part No.Model No.DescriptionClass
220096HAC44LD450×450 Light Duty Cast Iron Solid TopB
220108HAC44HD450×450 Heavy Duty Cast Iron Solid TopD
220120HAC44LDG450×450 Light Duty Galvanised GrateB

Access Cover Options for KPPS250, 900 & 1200L Pump Station

Part No.Model No.DescriptionClass
220168HAC66LD600×600 Light Duty Cast Iron Solid TopB
220180HAC66HD600×600 Heavy Duty Cast Iron Solid TopD
220192HAC66LDG600×600 Light Duty Galvanised GrateB

Access Cover Options for KPPS3000L Pump Station & Aquaflo Tanks

Part No.Model No.DescriptionClass
220228HAC69LD600×900 Light Duty Cast Iron Solid TopB
220240HAC69HD600×900 Heavy Duty Cast Iron Solid TopD
220264HAC69LDG600×900 Light Duty Galvanised GrateB

Access Cover Lifters

Part No.Model No.Description
220012HACLHLLong Handle Access Cover Lifter

Other Options

Other options available on request including:
  • Concrete infill covers
  • Multipart covers
  • Paver infill covers
  • Tile infill covers
  • Stainless steel or brass edged covers
  • Round Covers
  • Gas tight covers
  • Bolt down covers

Cast Iron Solid Top

cast-iron-solid-top

Hinged Galvanised Grate

hinged-galvanised-grate

Standard Poly Cover

standard-poly-cover

More Building Application Products