Tuthill Engineered To Impress
Tuthill’s manufacturing expertise and knowledge of applications enable them to provide you with an engineered solution. With All Pumps we are also ensuring you satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.
The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market. The design has so many inherent features and benefits that our traditional customers are also seeing the advantages. The excellent performance of the 1000 series pumps are solving problems in many industries and varying applications.
- Flow Range 2.3 to 190 GPM (8.7 to 720 LPM)
- Differential Pressure to 261PSI (18 BAR)
- for Higher Pressure Consult Factory
- •Viscosity to 9400 ssu (2000 cst)
- Temperature to 392 ºF (200 ºC)
- Max Speed
- Model 1010 up to 3600 RPM
- Model 1012-1024 up to 1750 RPM
- Max Inlet Pressure 870 PSI (60 BAR)
- Dependent on type of mechanical seal fitted
1000 Series Pump
1000 Series pumps are based on the proven internal gear principal, and have been enhanced in response to demands from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Tuthill’s goal was to design a pump that meets your technical requirements and is easily fitted into your system. The 1000 Series pumps are mechanical seal fitted and have a Carbon Bushing Idler as standard. Options are available for lip seals on direct-mounted pumps and a choice of ball bearing or carbon bearings in the body.
- Preset integral adjustable bolt-on relief valve
- Sintered metal or steel idler gear
- Can be vertically mounted
- Carbon steel rotor
- Non-pulsating flow
- EN1561 EN GIS-250 body
- Modular design for ports
- Flange has an o-ring seal
- Modular design for bushings
Ease Of Maintenance
- No labour to line up motor
- Unique seal flush system for prolonged life
- Pumps can be removed from the system without having to unthread any pipework, ensuring quick and leak free installatio
The 1000 Series pumps are fitted with SAE/DIN flanged ports, which enable Tuthill to offer various port options. Tuthill has the ability to build your pump with threaded, butt weld, socket weld ports, or a blank flange. The blank flange can be tapped to your specific requirement.
The 1000 series is designed to be close coupled directly to IEC or NEMA motors. This compact mounting process enables a smaller footprint, but also automatic shaft alignment when changing pump heads.
Vertical mounting optimizes the fit of the pump into smaller footprints. This is a highly requested configuration whenever floor space is limited. It is recommended that if the pumps are to be mounted in this manner, it is indicated at the inquiry stage of the buying process.
All the adapters can be supplied with a tapped port to facilitate fitting of a clear bottle. The bottle is used as a sight glass to determine seal status.
The 1000 series symmetrical design provides added flexibility. The pump head can be rotated in 90° increments, creating the ability to change port alignment from horizontal to vertical or reversing suction and discharge ports.
1000 Series Data
|Flow Rate at 50HZISO 32 at 104 °F (40 °C) 50 PSI (3.45 BAR)||Flow Rate at 60HZISO 32 at 104 °F (40 °C) 50 PSI (3.45 BAR)|
|720 RPM||960 RPM||1425 RPM||860 RPM||1150 RPM||1750 RPM|
Assembly 1012 To 1017
- Idler Gear
- Mechanical Seal
- Seal Housing
- Idler Pin
About Tuthill Pumps
Tuthill Pump Group has been providing positive displacement lubrication pumps for demanding OEM applications since 1927. Since that time, our product portfolio has developed to expand into a variety of markets and applications. Tuthill Pump products successfully handle applications from an extremely low-flow capacity with a high level of accuracy, to applications that are nearly solid in consistency with abrasive characteristics. Contact Us