Roper Pumps 3600 EVO Series

An upgrade of the workhorse 3600 Series, the 3600 EVO is designed to perform in the most challenging transfer conditions. With higher wear resistance, Roper 3600 Evo gear pumps can effectively handle high-temperature and high-abrasion fluids.

Built using heavy-duty materials, these pumps are long-lasting, can maximise efficiency, and minimise costly downtime.

Features & Benefits

Know more about the features & benefits of using Roper Pumps 3600 EVO Series.

Leak-free seal
ROPLATE™-coated shafts
Wear-resistant bushings
Easily repaired on-site

Available Options

We customise pumps according to your specific application. Get in touch with us to know your options.

Direct drive or built-on gear reducers
Materials: Gears, bearings, shafts, housing
Pump seal options
Relief valves
Baseplates
Spare parts

Key Specifications

Here are the key specifications of Roper Pumps 3600 EVO Series.

Flow: Up to 432 GPM (1635 lpm)
Pressures: Up to 125 PSI (8.6 bar)

Applications

Mixing, blending, recirculating, fixed and mobile transfer of:

Asphalt sealcoat
Molasses-based liquid feed supplements
Tar-sand crude oil
Condensate
Oilfield-produced water

Principle of Operation

A gear pump creates flow by carrying fluid between the teeth of two meshed gears. One gear is driven by the drive shaft, which in turn drives the other gear. Pumping chambers are formed between the teeth and are enclosed by the pump housing and side plates.

A partial vacuum is created at the inlet of the pump as the teeth unmesh. Fluid starts to flow in at this point and fills the space/vacuum. The fluid is then carried around the outside of the gears. As the teeth mesh again at the outlet, the fluid is forced out.