Flextool's P212 Series of Submersible Pumps

The Flextool submersible pumps are heavy-duty and highly efficient equipment built to survive the challenging conditions found in the construction, mining, concrete, drilling, and civil engineering industries. Although small in size, these Australian-made pumps are unbeatable at moving dirty and muddy water. The P212 submersible pumps are completely self-priming and highly robust in their design. The flexible shaft drive facilitates use in many situations where close–coupled pumps are not suitable. The new FP212 series comes with flexshaft support springs, which protect the drive shaft when operating over the sharp edge of excavations, pits, and dams.

Design Advantages

  • Double row oil bath bearings ensure extended service life
  • Corrosion-resistant stainless steel spindle prevents corrosion
  • Seven oil seals provide superior protection to bearings
  • Hardened steel wear plates protect alloy components from wear
  • Quick action cam lock hose fittings for tool-free connection
  • Oil bath lubrication protects pump against overheating during run dry

Available Options

Flexshaft length from 6 to 9 meters

Key Specifications

  • Capacity up to 63 m3/h
  • Solids up to 28 mm
  • Discharge head up to 26 m

GENERAL-PURPOSE

MODELS FP212G-6 FP212G-9
MAX DISCHARGE HEAD (m) 26 26
MAX DISCHARGE (m3/h) 63 63
SOLIDS CAPACITY (mm) 28 28

ABRASIVE HANDLING PUMPS

MODELS FP212G-6 FP212G-9
MAX DISCHARGE HEAD (m) 26 26
MAX DISCHARGE (m3/h) 63 63
SOLIDS CAPACITY (mm) 28 28

CHEMICAL PUMPS

MODELS FP212G-6
MAX DISCHARGE HEAD (m) 26
MAX DISCHARGE (m3/h) 36
SOLIDS CAPACITY (mm) 28

Applications

  • Quarries
  • Sandy soils
  • Sandpitsts
  • Slurry
  • Anodisers
  • Industrial waste
  • Salty water
  • Excavation pits
  • Dams
  • Construction sites
  • Trenches
  • Pier holes
  • Swimming pools
Abrasion Resistant FP212AFlextool Logo

OUR RANGE OF AVAILABLE Flextools's P212 Series

Talk to Experts
General Purpose FP212G

General Purpose FP212G

Abrasion Resistant FP212A

Abrasion Resistant FP212A

Chemical Resistant FP212C

Chemical Resistant FP212C

PRINCIPLE OF OPERATION

The Flextool submersible pumps are either diesel or petrol engine powered. As the engine starts, the impeller turns, forcing the water around it out of the pump’s discharge port. The partial vacuum created allows pressure to push water up the suction hose and into the suction side of the pump to replace the displaced water. When the water hits the rotating impeller, the energy of the impeller is transferred to the water, forcing the water out. The water is then displaced outward, and more water can now enter the suction side of the pump.

Servicing you anywhere in Australia

We’d love to hear from you. 
Please fill out the quick form below with as much detail as possible, and one of our experts will be in touch.