Centrifugal Pump - TKL MVE Industrial Process

The TKL MVE is a series of single-stage volute pumps designed for high flow and low head applications in various industries, municipal settings, and agricultural services. These centrifugal pumps are engineered according to the most modern research findings in hydraulics and hydrodynamics.

The overhung configuration of MVE pumps enables better suction performance and reduced cost of ownership through simple pipe layout and installation. The single-suction design, solid case, and back pull-out feature of these pumps are their additional selling points.

Features & Benefits

Know more about the features & benefits of using Centrifugal Pump - TKL MVE Industrial Process.

Single volute, symmetrical casing with integral suction and discharge for increased reliability
Mechanically balanced, mixed-flow, enclosed impeller extends seal and bearing life
Rigid overhung, stiff shaft design in stainless steel
Cast Iron casing and cover with large openings give access to gland and stuffing box
Two heavy-duty, grease-lubricated ball bearings carry all radial and thrust loads
Back pull-out design simplifies maintenance without disturbing piping

Available Options

We customise pumps according to your specific application. Get in touch with us to know your options.

Top discharge option
Material options: bronze, zinc-free bronze, austenitic cast iron and spheroidal/nodular irons
Shaft sleeve
Wear rings
Vertical design option
Close-coupled or immediate shaft-driven option
Special high-speed version
Spare parts
Sizes from 200 mm to 400 mm
Base/mounting plate

Key Specifications

Here are the key specifications of Centrifugal Pump - TKL MVE Industrial Process.

Flows to: 45,000 LPM ot 2700 m3/h
Heads to: 15 m
Press. to: 7 bar
Temp: to 100°C

Applications

Here is a list of industrial applications for which Centrifugal Pump - TKL MVE Industrial Process are commonly utilized.

Industries

Pulp & Paper
Mining
Steel & Primary Metals
Food & Beverage
Corn Wet Milling & Ethanol
Agriculture & Irrigation
Municipal
Dewatering and Drainage Needs
Pollution Control

Fluids Handled

Basic (Organic & Inorganic)
Water
Wastewater
Flood Water
Pulpy Liquids

flowserve-australia-tkl-centrifugal-pumps-mve-industrial-process-pumps-transp

TKL MVE Centrifugal Pump

FLOW UP TO 45,000 LPM (LITERS PER MINUTE)
OR 2700 M3/HR

PRINCIPLE OF OPERATION

Fluid enters the impeller through the “eye” and is “centrifuged” (hence the name) to the impeller periphery, with assistance from the impeller vanes.

As the impeller rotates, it imparts kinetic energy onto the liquid surrounding it due to friction. The liquid moves towards the outer periphery of the impeller; its kinetic energy is then changed to pressure. The impeller has vanes separated by channels through which the liquid flows. Each channel has an increasing flow path area. As the flow path area expands, the liquid’s velocity decreases and the pressure increases.

Due to the unique shape of the volute casing, the liquid undergoes further velocity decrease and pressure increase. The liquid is then discharged through the discharge port.

Flowserve Product Catalgue