Almatec Futur E Air-Operated Diaphragm Pumps - All Pumps Sales & Service

Almatec Futur E Air-Operated Diaphragm Pump

The FUTUR E model has been designed to be abrasion-resistant, which is a requirement for pumping slurries. To meet these operational demands, they are constructed of PE (polyethylene). It has a very high abrasion resistance (higher than steel), good impact value and withstands the introduction of slurry particles. Its good chemical properties allow handling both basic and acidic slurries. The FUTUR E is metal-free, with a maximum permitted liquid temperature of 70°C (158°F).

APPLICATIONS

Basic slurries
Acidic slurries

MATERIALS

Center housing: Polyethylene
Side housings: Polyethylene

PUMP SIZES & PERFORMANCE

FO 20 (20 l/min / 5.3 gpm)
FO 50 (50 l/min / 13 gpm)
FO 100 (100 l/min / 26 gpm)

Technical Data

Technical Data	Data models E
Technical Data	10	20	50	100	200
Dimensions for pump in mm (inch),
length	185 (7.3)	201 (7.9)	246 (9.7)	303 (11.9)	374 (14.7)
width	114 (4.5)	150 (5.9)	200 (7.9)	260 (10.2)	330 (13.0)
height	130 (5.1)	167 (6.6)	222 (8.7)	265 (10.4)	345 (13.6)
Dimensions for pump with damper in mm (inch),
length	185 (7.3)	201 (7.9)	246 (9.7)	303 (11.9)	374 (14.7)
width	114 (4.5)	150 (5.9)	200 (7.9)	260 (10.2)	330 (13.0)
height	245 (9.7)	282 (11.1)	354 (13.9)	428 (16.9)	577 (22.7)
Nominal port size (NPT)	3/8″	1/2″	1″	1 1/4″	1 1/2″
Air connection (NPT)	1/4″	1/4″	1/4″	1/4″	3/8″
Suction head, dry in mWC (ft.)	1 (3.3)	2.5 (8.2)	3.5 (11.5)	4 (13.1)	4.5 (14.8)
Suction head, wet in mWC (ft.)	8 (26.2)	9 (29.5)	9 (29.5)	9 (29.5)	9 (29.5)
Max. permissible driving pressure bar (psig)	6 (87)	6 (87)	6 (87)	6 (87)	6 (87)

Max. permitted operating temperature	Futur E
at max. 6 bar (87 psig)	70°C 158°F
at max. 5 bar (73 psig)	70°C 158°F
at max. 4 bar (58 psig)	70°C 158°F
at max. 3 bar (44 psig)	70°C 158°F
at max. 2 bar (29 psig)	70°C 158°F