About Tsurumi Pumps

Tsurumi Pumps

Tsurumi has the capacity to build over 1.4 million pumps per year. With Japanese quality, a huge range, an unbeatable value in dewatering, and sewage submersible pumps and waste water equipment; Tsurumi pumps are seen as global leaders!

FEATURES

  • Unbeatable Range … Dewatering and industrial submersible pumps with over 1800 models.
  • Innovative design … key features that enhance pump longevity and performance. Pumps deliver life cycle costs significantly below the industry average.
  • Quality guarantee … Tsurumi’s efficient, state of the art manufacturing facilities ensure the highest quality at the best possible price.

Tsurumi Pump was founded in 1924 in Osaka, Japan. Then, in the 1960’s, Tsurumi introduced its overseas strategy. Tsurumi’s technical capabilities first gained recognition in Asia in the 1970’s, and then in the United States and Europe short thereafter. This led to the official opening of Tsurumi America, Inc. in 1979.

CLICK HERE TO CONTACT US.

Tsurumi pumps are manufactured using only the most durable components, and they feature patented, cutting-edge technology to make them one of the most reliable, trustworthy pumps on the market.

The combination of these factors has led to remarkable successes in many fields, including construction, civil engineering, mining, industrial wastewater, domestic wastewater, sewage treatment, flood remediation, and more.

  • Tsurumi Pumps Hold Many unique features that enable them to last longer in tough environments

  • Oil Lifters that keep seals lubricated all the time and even while pump is running at an angle

  • Cable Anti-wicking joints that prevent water from entering the pump even if cable is cut

Single Phase Dewatering Pumps

Tsurumi HS Series Pumps | Dirty Water / Sand Pumps

The HS series are single-phase, portable dewatering submersible pumps. They have a spiral pump casing that allows sand and silt-laden water to pass easily through the pump. The shaft mounted agitator prevents “Air Lock” and stirs the mixture allowing the sediment to be removed.

HS Series Technical Specifications

  • Discharge port 50mm
  • Side discharge
  • Semi-vortex impeller (Urethane rubber for abrasion resistance)
  • Single phase, 2 pole motors 0.4 to 0.75kW
  • Spiral design to pass sand and silt through
  • Shaft mounted agitator suspends solids
  • Auto operation with float switch prevents dry running, saves energy & extends pump life
  • Simple to disassemble
  • Oil resistant cable
  • Aluminium alloy motor housing

Tsurumi HS Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
HS2.4S 50 0.4 12.2 207 7 11.3
HS2.75S 50 0.75 18 300 7 18.2

AUTO VERSION ... HSZ

HSZ2.4S 50 0.4 12.2 207 7 11.3
HSZ2.75S 50 0.75 18 300 7 18.2

SLURRY VERSION...HSD

HSD2.55S 50 0.55 13.2 220 10 15

Tsurumi LB Series Pumps | Slim Design Hire Specialists Pumps

The LB series are single-phase, lightweight and compact dewatering pumps. Their compact design makes them easy to handle, simple to set up and they even fit into an 8″ casing. These pumps are the top selling Tsurumi submersibles in North America. The semi-vortex impeller maintains pump performance even when worn. The discharge port can be set vertically or horizontally to minimise folding or bending of the
connected hose.

The automatic model has a level control electrode with a timer function that eliminates excessive activation caused be agitated water. The pump will stop one minute after water-electrode contact is lost.

LB Series Technical Specifications

  • Discharge port 50mm (80mm option)
  • Top discharge … slim line design means pump can fit into a 200mm pipe
  • Semi vortex/open type impeller (Urethane rubber)
  • Single phase
  • 2 pole motors from 0.48 to 1.5 kW
  • Multidirectional hose coupling
  • Flow thru design cools pump
  • Number 1 rental pump in USA
  • Oil resistant cable

Tsurumi LB Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
LB-480 50 0.48 11 225 6 10.4
LB-800 50 0.75 11 310 6 13.2

AUTOMATIC

LB-480A 50 0.48 11 225 6 111
LB-800A 50 0.75 11 310 6 13.8

Tsurumi LSC1.4S

Tsurumi LSC Series Pumps | Puddle Suckers

The LSC pump is a portable, single-phase residue dewatering pump. Tsurumi’s unique sealing device makes the pump capable of pumping down to floor level. The rubber-lined base plate prevents scratching to floor surface and the discharge direction is selectable between vertical and horizontal. This prevents folding or bending of the discharge hose.

LSC Series Technical Specifications

  • Discharge port 25mm
  • Top discharge … slimline design enables pump to be used in narrow locations
  • Semi vortex impeller (Urethane rubber)
  • Single phase, 2 pole motor, 0.48kW
  • Check valves prevent back flow
  • Flow thru design cools pump at low water levels
  • Rubber lined base plate
  • Minimum water level of 1mm …unique to Tsurumi
  • Oil resistant cable

Tsurumi LSC Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (in.) Weight (kg)
LSC1.4S 25 0.48 11 170 6 12
LSP1.4S 25 0.48 7 55 6 20

Tsurumi NK Series

Tsurumi NK Series Pumps | High head Specialists

The NK-series is a KTV-based single-phase dewatering pump with high head performance. The side-flow, top-discharge design assures efficient motor cooling even when it operates at low water levels. Semi-vortex pump design is adopted for maximum durability and maintaining pump performance. The pump has a built-in starting capacitor.

NK Series Technical Specifications

  • Discharge port 80mm
  • Top discharge … slimline design means pump can fit into narrow locations
  • Semi-vortex impeller (ductile cast iron)
  • Single phase, 2 pole 2.2kW motor
  • Side flow design to cool motor
  • Internal starting capacitor
  • Simple to disassemble
  • Oil resistant cable

Tsurumi NK Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
NK3-22 80 2.2 24 525 6 29

Three Phase Dewatering Pumps

Tsurumi KTz Series

Tsurumi KTZ Series | Dirty Water Hire/Construction Pumps

The KTZ series are three-phase, cast iron, high head dewatering pumps. The mechanical seal’s resistance to high pressure mean the pumps can be installed to a maximum submersion depth of 50m.

AUTO VERSION
The KTZE series are equipped with electrode control sensors for automatic operation. Pump operation starts when the water level rises and contacts the electrode. A timer function eliminates excessive activations caused by agitated water. The pump will operate for a further minute after the water-electrode contact is lost. The electrode eliminates dry-running, reduces power consumption and extends operating life.

KTZ Series Technical Specifications

  • Discharge port 50 – 150mm
  • Top discharge … Slimline design means pump can fit into narrow locations
  • Semi open type impeller (Hi chrome iron)
  • Three phase, 2 pole motors from 1.5 to 11kW
  • Side flow design to cool motor
  • Simple to disassemble
  • Multi-directional discharge port
  • Now with hose tail connectors, BSP thread options

Tsurumi KTZ Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
KTZ21.5 50 1.5 21.5 430 8.5 30
KTZ31.5 80 1.5 14.4 670 8.5 30
KTZ22.2 50 2.2 26 500 8.5 34
KTZ32.2 80 2.2 20.4 800 8.5 34
KTZ23.7 50 3.7 36.5 450 8.5 63
KTZ33.7 80 3.7 29 900 8.5 63
KTZ43.7 100 3.7 18 1440 8.5 63
KTZ35.5 80 5.5 32 1100 10 82
KTZ45.5 100 5.5 22.5 1750 10 82
KTZ47.5 100 7.5 40 1400 10 105
KTZ67.5 150 7.5 31 2040 10 107
KTZ411 100 11 48.5 1440 10 133
KTZ611 150 11 32.5 2440 10 136

AUTO VERSION

KTZE21.5 50 1.5 21 450 8.5 39
KTZE22.2 50 2.2 26 500 8.5 41
KTZE23.7 50 3.7 37 450 8.5 69
KTZE31.5 80 1.5 14 680 8.5 38
KTZE32.2 80 2.2 20 800 8.5 40
KTZE33.7 80 3.7 29 900 8.5 69
KTZE43.7 100 3.7 18 1420 8.5 69

Tsurumi KRS Series

Tsurumi KRS Series | Larger Solids Dirty Water Specialists

KRS series are cast iron, high volume, heavy-duty dewatering pumps with 4-pole motors. They offer reliability, ruggedness and durability.

Tsurumi KRS2 Series | Built in Agitator Slurry Pumps
With all the features of the standard KRS series, these heavy duty slurry pumps are equipped with a high chromium cast iron agitators that ensure smooth suction of the settled matter. The other wear parts such as the impeller and the suction plate are also made of high-chromium cast iron for extra durability.

KRS/KRS2 Series Technical Specifications

  • Discharge port 80 – 250mm
  • Top discharge
  • Semi-open type impeller, ductile cast iron (closed type on KRS1022)
  • Three phase, 4 pole motors (from 2.2 to 22kW) for continuous service

Tsurumi KTZ Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
KRS2-C3 80 2.2 10 1000 8 72
KRS2-D3 80 3.7 17 1400 8 91
KRS2-C4 100 3.7 14 1600 8 88
KRS2-D4 100 5.5 20 2000 8 98
KRS2-C6 150 7.5 19 2800 8 130
KRS2-D6 150 11 22 3700 8 158
KRS2-8S 200 11 18 5100 8 174
KRS815 200 15 21.5 6400 25 235
KRS819 200 18.5 29 5500 25 385
KRS822 200 22 34 5300 25 390
KRS822L 200 22 26 5900 25 390
KRS1022 250 22 12.2 12000 25 450

LOW HEAD / HIGH FLOW

KRS-43 100 3 14.8 1,820 12 95
KRS-63 150 3 8 3,250 15 97
KRS-65.5 150 5.5 17 3,200 20 118
KRS2-69 150 9 21 4,250 20 155
KRS-85.5 200 5.5 10 4,850 20 126
KRS2-89 200 9 15 5,300 30 175

SLURRY VERSION

KRS2-80 80 4 15.8 1,670 30 105
KRS2-100 100 6 17.1 2,350 30 145
KRS2-150 150 9 22 3,250 30 170
KRS-200 200 18 31 4,000 30 380

Tsurumi LH Series

Tsurumi LH Series | LH-W Series

The LH-W series are an extra high head version of the LH pumps. They have two abrasion resistant, hi chrome closed impellers. The centered discharge flange ensures the pump is balanced for lifting.

LH Series | Extra High Head
These cylindrical pumps can be installed in narrow places as the centered discharge flange ensures the pumps are balanced for lifting. Cast iron or cast 316 stainless steel options.

LH/LH-W Series Technical Specifications

  • Discharge port 50 – 100mm
  • Top discharge … slimline design enables pump to be used in bores and wells
  • Twin impeller, except LH33.0 – (Hi chrome iron)
  • Three phase, 2 pole motors from
  • 3 to 110kW

Tsurumi LH/LH-W Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
LH23.0W 50 3 39 600 6 46
LH25.5W 50 5.5 60 465 6 80
LH311W 80 11 79 825 8.5 130
LH322W 80 22 120 1,180 8.5 304
LH430W 100 30 125 1,400 8.5 324
LH4110W 100 110 200 1,000 8 1270

SINGLE STAGE MODEL

KH33.0 80 3 17.9 1,000 6 42

LH SERIES

LH422 100 22 66 2,400 6 350
LH430 100 30 80 2,300 6 355
LH615 150 15 52 2,400 8.5 213
LH619 150 19 42 4,370 12 350
LH622 150 22 54 3,750 12 360
LH637 150 37 89.5 2,380 6 495
LH645 150 45 90 2,975 6 510
LH675 150 75 132 2,450 6 850
LH690 150 90 150 2,500 6 1100
LH6110 150 110 177 3,000 6 3000
LH837 200 37 51.8 5,375 20 495
LH845 200 45 50.9 5,450 20 510
LH875 200 75 70 6,500 20 850
LH890 200 90 90 6,000 20 1150
LH8110 200 110 107 6,500 20 1325

Batch Plant Pumps

Batch Water, Clean Water Pits, Washout Pits, Stirrer Pits, Slump Stand

Tsurumi KTz Series

Tsurumi KTZ Series | No1 Batch Plant Pump Series on the Market

The KTZ series are three-phase, cast iron, high head dewatering pumps. The mechanical seal’s resistance to high pressure mean the pumps can be installed to a maximum submersion depth of 50m.

AUTO VERSION
The KTZE series are equipped with electrode control sensors for automatic operation. Pump operation starts when the water level rises and contacts the electrode. A timer function eliminates excessive activations caused by agitated water. The pump will operate for a further minute after the water-electrode contact is lost. The electrode eliminates dry-running, reduces power consumption and extends operating life.

KTZ Series Technical Specifications

  • Discharge port 50 – 150mm
  • Top discharge … Slimline design means pump can fit into narrow locations
  • Semi open type impeller (Hi chrome iron)
  • Three phase, 2 pole motors from 1.5 to 11kW
  • Side flow design to cool motor
  • Simple to disassemble
  • Multi-directional discharge port
  • Now with hose tail connectors, BSP thread options

Tsurumi KTZ Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
KTZ21.5 50 1.5 21.5 430 8.5 30
KTZ31.5 80 1.5 14.4 670 8.5 30
KTZ22.2 50 2.2 26 500 8.5 34
KTZ32.2 80 2.2 20.4 800 8.5 34
KTZ23.7 50 3.7 36.5 450 8.5 63
KTZ33.7 80 3.7 29 900 8.5 63
KTZ43.7 100 3.7 18 1440 8.5 63
KTZ35.5 80 5.5 32 1100 10 82
KTZ45.5 100 5.5 22.5 1750 10 82
KTZ47.5 100 7.5 40 1400 10 105
KTZ67.5 150 7.5 31 2040 10 107
KTZ411 100 11 48.5 1440 10 133
KTZ611 150 11 32.5 2440 10 136

AUTO VERSION

KTZE21.5 50 1.5 21 450 8.5 39
KTZE22.2 50 2.2 26 500 8.5 41
KTZE23.7 50 3.7 37 450 8.5 69
KTZE31.5 80 1.5 14 680 8.5 38
KTZE32.2 80 2.2 20 800 8.5 40
KTZE33.7 80 3.7 29 900 8.5 69
KTZE43.7 100 3.7 18 1420 8.5 69

Tsurumi KRS Series

Tsurumi KRS Series | Wedge Puts, Slurry Pumps

KRS series are cast iron, high volume, heavy-duty dewatering pumps with 4-pole motors. They offer reliability, ruggedness and durability.

Tsurumi KRS2 Series | Built in Agitator Slurry Pumps
With all the features of the standard KRS series, these heavy duty slurry pumps are equipped with a high chromium cast iron agitators that ensure smooth suction of the settled matter. The other wear parts such as the impeller and the suction plate are also made of high-chromium cast iron for extra durability.

KRS/KRS2 Series Technical Specifications

  • Discharge port 80 – 250mm
  • Top discharge
  • Semi-open type impeller, ductile cast iron (closed type on KRS1022)
  • Three phase, 4 pole motors (from 2.2 to 22kW) for continuous service

Tsurumi KTZ Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
KRS2-C3 80 2.2 10 1000 8 72
KRS2-D3 80 3.7 17 1400 8 91
KRS2-C4 100 3.7 14 1600 8 88
KRS2-D4 100 5.5 20 2000 8 98
KRS2-C6 150 7.5 19 2800 8 130
KRS2-D6 150 11 22 3700 8 158
KRS2-8S 200 11 18 5100 8 174
KRS815 200 15 21.5 6400 25 235
KRS819 200 18.5 29 5500 25 385
KRS822 200 22 34 5300 25 390
KRS822L 200 22 26 5900 25 390
KRS1022 250 22 12.2 12000 25 450

LOW HEAD / HIGH FLOW

KRS-43 100 3 14.8 1,820 12 95
KRS-63 150 3 8 3,250 15 97
KRS-65.5 150 5.5 17 3,200 20 118
KRS2-69 150 9 21 4,250 20 155
KRS-85.5 200 5.5 10 4,850 20 126
KRS2-89 200 9 15 5,300 30 175

SLURRY VERSION

KRS2-80 80 4 15.8 1,670 30 105
KRS2-100 100 6 17.1 2,350 30 145
KRS2-150 150 9 22 3,250 30 170
KRS-200 200 18 31 4,000 30 380

Water Harvesting Pumps

LH Series – Large Flow, High Heads and Can operate on an Angle

LHW Series – Two Stages, Ultra-High Heads – Can operate on an Angle

Tsurumi LH Series

Tsurumi LH Series | LH-W Series

The LH-W series are an extra high head version of the LH pumps. They have two abrasion resistant, hi chrome closed impellers. The centered discharge flange ensures the pump is balanced for lifting.

LH Series | Extra High Head
These cylindrical pumps can be installed in narrow places as the centered discharge flange ensures the pumps are balanced for lifting. Cast iron or cast 316 stainless steel options.

LH/LH-W Series Technical Specifications

  • Discharge port 50 – 100mm
  • Top discharge … slimline design enables pump to be used in bores and wells
  • Twin impeller, except LH33.0 – (Hi chrome iron)
  • Three phase, 2 pole motors from
  • 3 to 110kW

Tsurumi LH/LH-W Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
LH23.0W 50 3 39 600 6 46
LH25.5W 50 5.5 60 465 6 80
LH311W 80 11 79 825 8.5 130
LH322W 80 22 120 1,180 8.5 304
LH430W 100 30 125 1,400 8.5 324
LH4110W 100 110 200 1,000 8 1270

SINGLE STAGE MODEL

KH33.0 80 3 17.9 1,000 6 42

LH SERIES

LH422 100 22 66 2,400 6 350
LH430 100 30 80 2,300 6 355
LH615 150 15 52 2,400 8.5 213
LH619 150 19 42 4,370 12 350
LH622 150 22 54 3,750 12 360
LH637 150 37 89.5 2,380 6 495
LH645 150 45 90 2,975 6 510
LH675 150 75 132 2,450 6 850
LH690 150 90 150 2,500 6 1100
LH6110 150 110 177 3,000 6 3000
LH837 200 37 51.8 5,375 20 495
LH845 200 45 50.9 5,450 20 510
LH875 200 75 70 6,500 20 850
LH890 200 90 90 6,000 20 1150
LH8110 200 110 107 6,500 20 1325

Mining and Industrial Slurry Pumps

Tsurumi KRS Series

Tsurumi KRS Series | Larger Solids Dirty Water Specialists

KRS series are cast iron, high volume, heavy-duty dewatering pumps with 4-pole motors. They offer reliability, ruggedness and durability.

Tsurumi KRS2 Series | Built in Agitator Slurry Pumps
With all the features of the standard KRS series, these heavy duty slurry pumps are equipped with a high chromium cast iron agitators that ensure smooth suction of the settled matter. The other wear parts such as the impeller and the suction plate are also made of high-chromium cast iron for extra durability.

KRS/KRS2 Series Technical Specifications

  • Discharge port 80 – 250mm
  • Top discharge
  • Semi-open type impeller, ductile cast iron (closed type on KRS1022)
  • Three phase, 4 pole motors (from 2.2 to 22kW) for continuous service

Tsurumi KTZ Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
KRS2-C3 80 2.2 10 1000 8 72
KRS2-D3 80 3.7 17 1400 8 91
KRS2-C4 100 3.7 14 1600 8 88
KRS2-D4 100 5.5 20 2000 8 98
KRS2-C6 150 7.5 19 2800 8 130
KRS2-D6 150 11 22 3700 8 158
KRS2-8S 200 11 18 5100 8 174
KRS815 200 15 21.5 6400 25 235
KRS819 200 18.5 29 5500 25 385
KRS822 200 22 34 5300 25 390
KRS822L 200 22 26 5900 25 390
KRS1022 250 22 12.2 12000 25 450

LOW HEAD / HIGH FLOW

KRS-43 100 3 14.8 1,820 12 95
KRS-63 150 3 8 3,250 15 97
KRS-65.5 150 5.5 17 3,200 20 118
KRS2-69 150 9 21 4,250 20 155
KRS-85.5 200 5.5 10 4,850 20 126
KRS2-89 200 9 15 5,300 30 175

SLURRY VERSION

KRS2-80 80 4 15.8 1,670 30 105
KRS2-100 100 6 17.1 2,350 30 145
KRS2-150 150 9 22 3,250 30 170
KRS-200 200 18 31 4,000 30 380

Tsurumi GPN Series

Tsurumi GPN Series Pumps | Industrial & Mining Slurry Pump

The GPN series are powerful, heavy duty sand and slurry pumps with large agitators. Hi chrome wearing parts and an extra thick pump casing means the pump delivers long-lasting performance and outstanding durability. They have a water jacket for forced cooling of the motor, which permits the pump to operate at low water levels for extended period of time.

GPN Series Technical Specifications

  • Discharge port 80 – 200mm
  • Side discharge
  • Semi open type impeller (Hi chrome)
  • Three phase, 4 pole & 6 pole motors, 5.5 – 37kW
  • Hi chrome wearing parts for longevity
  • Water jacket cools motor even at low water levels
  • Air release valve in water jacket prevents air-lock
  • Chromium Molybdenum motor shaft

Tsurumi GPN Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg) Further Information
GPN35.5 (GPN3-80) 80 5.5 16.3 1,900 30 145
GPN411 (GPN3-100) 100 11 19.3 3,250 30 217
GPN415 100 15 21 4,000 30 220
GPN422 100 22 34 3,600 30 415
GPN622 150 22 28 5,000 30 415
GPN837 200 37 24 9,000 30 800

Tsurumi GSZ GSD series pumps

Tsurumi GSZ & GSD Series Pumps | Industrial & Mining Slurry Pump

4 Pole

GSZ-4 series are high head and high volume dewatering pumps with 4-pole motors. The pumps have a water jacket surrounding the motor casing. This allows the pump to operate at low water levels for extended periods.

6 Pole

The GSZ-6 series are powerful, high volume sand pumps operated by a 6-pole motors. Hi chrome wearing parts, coupled with the slow speed motor, will ensure extremely long wear life. It has a water jacket for forced cooling of the motor which permits the pump to operate at low water levels for extended period of time.

GSZ / GSD Series Technical Specifications

4 Pole

  • Discharge port 150 – 250mm
  • Side discharge
  • Closed type impeller (Hi chrome) except GSZ2-75-4 which is cast 304 stainless steel.
  • Three phase, 4 pole motors (from 37 to 75kW)

6 Pole

  • Discharge port 200mm
  • Side discharge
  • Semi open type impeller (Hi chrome iron)
  • Three phase, 6 pole motors, 22 – 37kW
  • Hi chrome wearing parts for longevity
  • Water jacket cools motor even at low water levels

Tsurumi GSZ / GSD Series Technical Specifications

Model Discharge Size (mm) Motor Output (kW) Max Head (m) Max Capacity (l/min) Max Solid Diameter (mm) Weight (kg)
GSZ5-37-4H 150 37 60 5,000 10 595
GSZ5-37-4 200 37 43 8,500 25 566
GSZ4-45-4 200 45 46 9,000 25 583
GSZ2-55-4 250 55 50 9,500 25 1091
GSZ2-75-4 250 75 54 13,000 25 1141
GSZ2-75-4L 250 75 37 18,000 25 1200

6 POLE VERSION

GSZ5-22-6 200 22 21 9,000 10 685
GSZ5-37-6 200 37 28 10,500 50 796

SLURRY VERSION

GSD-37-4 200 37 37 7,000 25 685
GSD-55-4 200 55 38 9,000 25 1215
GSD-75-4 250 75 48 10,600 25 1215